[gfarm-discuss:05744] Re: gfarm-fuse & freebsd 6.1

[Takuya Ishibashi <takuya@xxxxxxxxxx>]

Hi Kulikov,

Sorry for my late reply.
The workings of GfarmFS-FUSE were not checked on FreeBSD.

statvfs->f_frsize is not set, therefore df command cannot work correctly 
on FreeBSD.
<sys/statfs.h> is needless, because <sys/statfs.h> is included in <fuse.h>.
The "configure.in" is not good for FreeBSD.

These will be fixed on next GfarmFS-FUSE release.
Thank you for your report.

--
Takuya Ishibashi

From: Kulikov Andrei <avk@xxxxxxxxxxxxxxx>
Subject: [gfarm-discuss:05483] Re: gfarm-fuse & freebsd 6.1
Date: Wed, 22 Nov 2006 09:41:02 +0300

> > Hi!
> > I'am trying to use Gfarm 1.4 with gfuse 1.3.1 on Freebsd 6.1. 
> > Gfarm was built from source. Fuse was installed from ports and "hello" test works fine.
> > I had some troubles with configure while installing gfuse. But setup completed and seems that all is ok. 
> > 
> > with gfreg: 
> > $gfreg test.txt gfarm:test.txt
> > $gfls gfarm:test.txt
> > gfarm:test.txt
> > 
> > mount gfarm with gfuse:
> > $gfarmfs /tmp/fuse
> > $ls /tmp/fuse
> > test.txt
> > 
> > file exist. but when i tried to create another file in /tmp/fuse with touch, it got error:
> > $cd /tmp/fuse
> > $touch file
> > touch: file: No such file or directory
> > Also cp,cat,mv got the same error.
> > But mkdir command goes well.
> 
> problem was solved. I replaced the string -DFUSE_USE_VERSION=22 with -DFUSE_USE_VERSION=25 in Makefile and recompiled Gfarmfs.
> Configure skript is buggy? 
> 
> btw, freebsd uses the include file <sys/mount.h> instead of <sys/statfs.h>.
> check it:
> #ifdef USE_GFS_STATFSNODE                                                                                                    
>     #ifndef __FreeBSD__                                                                                                      
>         #include <sys/statfs.h>                                                                                              
>     #else                                                                                                                    
>         #include <sys/param.h>                                                                                               
>         #include <sys/mount.h>                                                                                               
>     #endif                                                                                                                   
> #endif 
> 
> heh, but df -h doesn't show bytes. why? :(
> 
> [root@c10:/tmp/fuse]#df -h
> Filesystem            Size    Used   Avail Capacity  Mounted on
> /dev/ad0s1a           496M    325M    131M    71%    /
> devfs                 1.0K    1.0K      0B   100%    /dev
> /dev/ad0s1g            58G    3.7G     50G     7%    /home
> /dev/ad0s1d           989M    143M    767M    16%    /tmp
> /dev/ad0s1f           9.5G    3.3G    5.4G    37%    /usr
> /dev/ad0s1e           1.9G     99M    1.7G     5%    /var
> unix.sk:/usr/ports     48G     37G    7.7G    83%    /usr/ports
> unix.sk:/usr/ftp       48G     37G    7.7G    83%    /mnt/ftp
> /dev/fuse0              0B      0B      0B     4%    /tmp/fuse
> 
> -- 
> Kulikov Andrei
>